Wireless dust extraction starter kit with Aersync P1, Aerswitch Mini and ToolSense

Aersync P1 automatic vacuum switch and dust extractor controller with red StoP display, front view

Aersync P1 automatic vacuum switch with red StoP display, side angle showing connections

Dust extraction setup diagram with ToolSense wireless sensor and remote

Multiple woodworking tools using wireless ToolSense sensors with one dust extractor

Workshop diagram showing a mitre saw with ToolSense and dust extractor

Aersync P1 automatic single-phase dust extractor controller

Aerswitch wireless receiver for Aersync P1 dust extractor remote control

ToolSense wireless tool sensor for automatic dust extraction

Aerswitch four-button wireless dust extractor remote control

In stock

Wireless Dust Extraction Starter Kit – 1 to 4 Tools

Name: Automatic Dust Extraction Kit for 1–4 Tools | Aerguard
Brand: Aerguard
Availability: InStock

Price range: $406.60 through $809.40

ToolSense compatibility: Aersync P1 controllers purchased before September 2026 need a firmware upgrade. Contact Aerguard before ordering if using an older P1.

This kit includes a new, compatible Aersync P1. The firmware warning applies only to pre-existing older P1 controllers, not the new controller supplied in this kit.

Start your tool and let your dust extractor start automatically—even from another workstation.

🔹 Complete Wireless Controls – Includes Aersync P1, an Aerswitch Mini receiver, your chosen number of ToolSense sensors and one four-button remote.

🔹 Customise the Illustrated Setup – The image shows an example; choose your controller rating, ToolSense rating and quantity below.

🔹 Start with One Tool – Choose one ToolSense for a single wireless workstation, or add sensors for more tools.

🔹 Automatic and Remote Control – ToolSense detects your tool starting; the included remote gives you manual ON/OFF and timer control.

🔹 2-Year Warranty & Local Support – Covers manufacturing defects, with Australian-based support.

Controls only: Tools, dust extractors, hoses, ducting and blast gates are not included.

Controller

Tool Sense

ToolSense Rating

Clear

Free shipping: On all orders over $250.

Sku: N/A Available: In stock Category: Controller

Guarantee Safe Checkout:

Description

Wireless Dust Extraction Starter Kit

This automatic dust extraction kit lets tools at separate workstations start one shared dust extractor. Start a tool connected to ToolSense and its signal tells Aersync P1 to start extraction. Choose 1–4 sensors for your workshop. See automatic dust extraction setup examples.

What’s Included

1 × Aersync P1 controller, in the selected rating
1 × Aerswitch Mini receiver (included 1 × four-button remote)
1–4 × ToolSense sensors, according to your selected quantity

Power tools, dust extractors, hoses, ducting, blast gates and workshop fittings are not included.

How It Works

Connect the extractor to P1 and the Aerswitch Mini receiver to P1. Plug each tool into its ToolSense, connect it to a suitable outlet and pair the sensor with the receiver. Test operation and wireless reception before permanent mounting.

The four-button remote provides manual ON/OFF, 10-minute and 8-hour commands. Use your existing hoses and blast gates to route airflow; this kit does not operate blast gates.

Choose Your Package

Choose the Aersync P1 controller rating (10A or 15A), the number of ToolSense sensors (1–4), and the ToolSense sensor rating (10A or 15A) independently. All ToolSense sensors in a selected package have the same rating. The controller and sensors do not need matching ratings: each must suit its own connected electrical load and outlet. The 15A versions require appropriate 15A outlets. If you need a mixture of 10A and 15A ToolSense sensors in one kit, contact Aerguard before ordering.

Warranty & Support

2-year warranty against manufacturing defects and Australian-based support. Aerguard products are designed and assembled in Australia.

ToolSense compatibility with older Aersync P1 controllers

Aersync P1 controllers purchased before September 2026 need a firmware upgrade to work with ToolSense. The firmware upgrade and testing are free. You pay inbound postage to Aerguard; Aerguard pays return postage within Australia. Contact Aerguard before ordering if you plan to use ToolSense with an older P1.

This kit includes a new, compatible Aersync P1. The firmware warning applies only to pre-existing older P1 controllers, not the new controller supplied in this kit.